Do not rub it, or use circular motions, as this can cause an uneven appearance during drying. Wipe the oil in the direction of the grain following the length of the plank. The best thing to use is either a rag or a paint pad (the ones with a handle work best). If the flooring is looking lacklustre and tired, normally all that has happened is that the top layer of Hardwax Oil has worn away with the years of feet, paws and general life! Give the floor a really good clean using a Bona (or similar) floor cleaning solution, let it air dry, then work some more Hardwax Oil into the planks, remembering to give it a stir first. So, your flooring is looking a bit worn and tired, should you get it sanded right back down to the bare wood, and refinish it? The answer is almost certainly no. Lastly, you do not need to walk on eggshells – if you manage to scratch or dent the floor, it can be repaired with some TLC and Hardwax Oil.This will ensure the flooring is kept at a temperature ideal for wooden flooring, and it will minimise the risk of swelling, expansion or creaking. Keep the room temperature between 18 and 24 degrees Celsius and the relative humidity between 45 and 60%.So, do it before bed, go to sleep, wake up, and voila! A lovely re-coated floor that is now protected again for a few years. It is very simple to do, with no need for machinery and the floor can be walked on again after 4-6 hours. So, depending on the traffic, most areas will need a good clean after three/four years, and then a coat of Hardwax oil worked back into the wood. And that’s fine, but of course the top layer of Hardwax oil will eventually wear down. Over the years, people will walk over the planks, drag furniture, it will get used exactly as a floor should be. You need to top up the oil in a car, and you need to do the same for a wooden floor. It needs to be cared for and maintained to ensure it will stay looking beautiful for generations. We recommend a cleaning product brand called Bona, and we definitely say no to steam mopping, as it forces moisture into the wood. This will help protect the finish, will not damage or dull the oil, and most importantly, it will clean the floor! Wood is no different than any other floor – it still needs cleaning to prevent bacteria and dirt from building up. The truth is in fact the opposite! You should always use a mop (wrung out so it is no longer dripping) and a bucket with warm water, and most importantly, use a floor cleaning solution that is designed for oiled wooden flooring.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |